[Driver] NI-DAQmx Version 8.0 for Windows 2000/XP

DAQ8可以從這邊下載:NI-DAQmx Version 8.0 for Windows 2000/XP

NI-DAQmx Version 8.0 for Windows 2000/XP

install.txt (English Installation Instructions (920 B))
NIDAQ800.zip (NI-DAQmx Installation File (466 MB))
readme.html (English ReadMe file (57 KB))
readme_deu.html (German ReadMe file (64 KB))
readme_fra.html (French ReadMe file (76 KB))
readme_jpn.html (Japanese ReadMe file (58 KB))

Product Line: Multifunction DAQ

Version: 8.0

Category: Driver

Platform(s): Windows 2000; Windows XP


NI-DAQmx for PC Compatibles, version 8.0 for Windows XP/2000

NI-DAQmx 8.0 is the latest measurement services software for your data acquisition and signal conditioning devices. NI-DAQmx 8.0 sets the standard for ease-of-use and performance through:

  • Support for LabVIEW 8 -- LabVIEW Project, Shared Variable, etc..
  • Support for the world's first PCIe data acquisition devices .
  • OPC connectivity with devices supported by NI-DAQmx .
  • NI-DAQmx Device Monitor to detect USB devices when plugged in and pop-up dialog box where you can choose to run test panels, launch MAX, or launch VI Logger.
  • Human-readable configuration import/export from MAX for NI-DAQmx configuration data.
  • Usability improvements and features enhancements to DAQ Assistant.
  • LabVIEW support for synchronous and asynchronous DAQ events.
  • Querying of DAQ device capabilities including available physical channels and bus type.
  • Create a printable report in MAX detailing your NI-DAQmx hardware configuration.

For more information on NI-DAQmx features and benefits, click here. For more information on what is new in NI-DAQmx 8.0, refer to the NI-DAQ Readme, accessible from Start>>Programs>>National Instruments>>NI-DAQ after you install NI-DAQmx as described below.

NI-DAQmx Installation Instructions:

  1. Create a temporary folder on your local hard drive.
  2. Extract the NIDAQ800.zip file into the folder created in Step 1. This creates the installation files necessary for installing NI-DAQmx.
  3. To launch the NI-DAQmx installer, run the autorun.exe program created in Step 2

National Instruments supports the latest version of NI-DAQmx for Windows driver software for application development with NI LabVIEW, LabWindows/CVI, and Measurement Studio 7.x or later on Windows 2000/XP.

Compression: WinZip

Date: 2005/09/27